40 ea 4.5 x 1.5 Aluminum Instrument Drawer Handles

Description

Click here to see the rest of our large selection of Aircraft Hardware!
See all of our Machine Screws!
RAF Instrumentation Handles:
Quantity:
40
Size:
4.5" x 1.5" nominal
Thread:
10-32 (.531" deep)
-
"A" dimension in photo
Overall Length:
4.800"
-
Not in photo but it is the absolute overall length of the handle - measured outside-to-outside
Width:
1.500"
-
"H" dimension in photo
Threaded Holes center-to-center:
4.500" -
"L" dimension in photo
Minor Thickness:
9/32" (.281") -
As shown in photo as "9/32" dimension in photo
Major Thickness:
5/8" (.625") -
As shown in photo as "5/8" dimension in photo
Inside Radius:
Unknown -
"R" dimension in photo  - see actual photos of handle for visual reference
Material:
Aluminum
Coating:
Unknown but it appears to be Clear Anodized.
Aerospace P/N:
Distinguishing
Features:
Great for adding a strong, yet lightweight aircraft quality handle to just about anything including instrument panels, cabinets,  drawers, windows, etc.  Beautiful polished aluminum is color neutral and will look good in any application.   Mounted by drilling two holes in cabinet/drawer and installing 2 - 10-32 screws.   Drawer handle nomenclature refers to the center-to-center hole spacing as the width.  So, even though this handle has an overall length of 4.8", it is referred to as a "4.5" handle". Each handle (less mounting hardware) weighs 44 grams.
Ships in factory sealed packaging. Brand new stock!
These are made by RAF Electronic Hardware (search google)
I do
NOT
sell cheap junk.  These fasteners are straight from our vast aircraft hardware inventory which were used to support light corporate aircraft service and maintenance.   If you know anything about aviation hardware you will know that these are
high quality
fasteners that cost good money.  These are not worth much since I can't provide manufacturer's quality control certifications as required in some aviation applications.  However, there are many uses for surplus hardware in aviation where certifications are not needed or required. Aircraft hardware is the perfect choice for the race car builder, experimental aircraft builder, or the discriminating hobbyist who demands a much higher level of quality in their fasteners.  In most cases, we are offering aviation fasteners for
less
than the cost of cheap-grade commercial variety you will find in retail hardware stores. As an added bonus, you will not get gouged on shipping!
No certs
No warranty
Buyer to determine airworthiness of all items
All sales final
Subscribe to my newsletter as I will be adding literally thousands of aircraft hardware items - many of them RARE and hard to find
I will combine items to save you money on shipping.  You must email me before paying so I can modify your invoice. - Thanks!
How to find what you need from our machine screw inventory:
You may shop our large screw inventory using the category links on the nav bar to your left. The nav bar links are arranged by screw head/drive type only.  If you are looking for a combination of specs, simply type the specifics in our store search box, for example: something like
"6-32 Screws" "4-40 Stainless Fillister
",  "
Brass Pan
", or "
Aluminum Phillips Flat"
(without the quotes). Care has been taken to include the pertinent nomenclature in the titles of each screw to make searching easy and accurate.  For materials, use
"Aluminum", "Brass", "Stainless", "CRES", "Nylon"
. If the title of a screw item doesn't denote a material, it is alloy steel by default. There isn't enough room in the title to go into plating and coatings. For the thread, you will find the consistent use of "diameter - Threads per inch" syntax.. For example
"2-56", "10-32", or "1/4-28", etc...
.  All screw titles have the term "screws", so if you are searching for all screws of size 8-32, you simply type in
"8-32 Screws"
in the search box (without quotes). For drive type, use
"Phillips", "Pan", "Flat", "Hex", "Round", "Truss", "Binding",
or
"Oval"
.  There isn't enough room in the title to denote 82 degree vs. 100 degree countersink on flat head screws.  Searching for "Drilled Screws" will return all Slotted Fillister Head screws since they are the only one's will holes drilled for safety wire.  BTW, the term
"Head"
is not used in screw titles, so including this term will not return any results from our machine screw category. Scroll to bottom of this description to use our machine screw quick links for common screw types and materials.
Box # RCA75229 A613
Machine Screw Quick Links
See all Fillister Head Screws
See all Pan Head Screws
See all Round Head Screws
See all Truss Head Screw
See all Flat Head Screws
See all Oval Head Screws
See all Stainless Screws
See all Brass Screws
See all CRES Screws
See all Nylon Screws
See all Aluminum Screws
See all 2-56 Screws
See all 4-40 Screws
See all 6-32 Screws
See all 8-32 Screws
See all 10-32 Screws
See all 1/4-28 Screws
See all Slotted Screws
See all Phillips Screws
Visit my eBay Store:
rehabsys
Sellebrity Analytics