Estes Flying Model Rocket Kit Interceptor 1250

Description

Estes Flying Model Rocket Kit Interceptor 1250
Towering over 2 feet tall, the Interceptor delivers excellent flight performance on B and C engines. When launched on the recommended C engine, blast this gorgeous rocket to heights of more than 525 feet into the air. Be the hit at your launch site and get your Interceptor today!
Envisioned by Estes designers to be operational by 2050, the Estes “Interceptor” is an ultra-sophisticated rocket that could patrol our galaxy for possible aggression by hostile aliens. Highly advanced defense systems, which includes photon and laser armaments as well as ION drive for extended tours around the Milky Way only enhance the rocket! This kit returns with quality features Estes is known for like laser cut balsa parts, two full color waterslide decals and detailed plastic parts including the nose cone, wing pods and tail cone. When properly outfitted for launch, flights over 500 feet are possible with a soft landing on a colorful 18” parachute. The futuristic looking Interceptor is sure to be the envy of everyone at the launch site.
Length: 26 in. (66 cm), Diameter: 1.3 in. (33 mm), Estimated Weight: 3.9 oz. (110.6 g), Wingspan: 7.4 in. (188 cm)
Laser Cut Wood Fins, Waterslide Decals, Parachute Recovery
Recommended Engines: B4-2, B6-4, C6-5
Max Altitude: 525 ft. (160 m)
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code