ESTES FLYING MODEL ROCKET KIT MAGICIAN 2440

Description

Estes Flying Model Rocket Kit Magician 2440
Out of Production
Conjure up some special, space magic with the Magician! No tricks up anyone's sleeve here, just a super high performance payload model rocket. The talented Estes rocket shop designers have spun their magic to create an enormous, supersized payload rocket. The Magician can handle all the power you put in the motor tube to send it on a magical mystery tour of the atmospheric kind!
This sorcerer stands an impressive 33.5 inches tall and has a clear payload section. You can launch just about anything into space. Well, not quite anything, but it's sure to hold a small race car, an action figure, or whatever your imagination can dream up. If it fits into the payload section, launch it!
A Skill Level 3 rocket, this kit comes with high quality laser cut wood fins and water-slide decals. Designed to be flown on D or *E engines, this rocket will scream off the launch pad to heights over 1600 feet. Getting this illusionist back to earth is magically accomplished on a colorful pre-assembled 18 inch parachute.
Skill Level 3
Length: 33.5 in. (85 cm)
Diameter: 1.33 in. (34 mm)
Estimated Weight: 3.5 oz. (100 g)
Laser cut Wood Fins, Water-slide Decals, Clear Payload Section, 18 in (46 cm) Parachute Recovery
Recommended Engines: D12-5, *E9-6 Projected Max Altitude: 1600 ft. (488 m)
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly.  The materials are primarily cardboard tubes, balsa or plastic fins and nose cone.  Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code