WEBER 40-44-48 IDF EFUEL CARBURETOR REBUILD KIT W/FLOAT HPMX 40 - 44 RADKE 703

Description

Now SUPPLIED WITH Radke Services Efuel Safe / Alcohol Resistant Replacement Accelerator Pump Diaphragm for Weber 40-44 &48 IDF carburetors as well as EMPI HPMX 40&44's.
Both Early spring loaded and Late included.
Not just
an excellent replacement for any regular grade of gasoline,
This will stand up to the various ethanol mix fuels around the country as well as High Octane race fuels 110 + .
IMPORTANT!!  TOP GASKETS WITH CUT OUTS WILL ALLOW FUEL SPILLAGE OVER INTO THE JET AND BODY AREAS AND THE FLOATS TO BOUNCE, CAUSING FLOODING AND RICH RUNNING ENGINES WHEN DRIVING, TURNING OR BOUNCING ON ROUGH & OFF-ROAD CONDITIONS, MAKING THE CARBURETORS MOTION SENSATIVE. OUR SOLID CENTER GASKETS PREVENT THIS. A MUCH BETTER DESIGN. DON’T BUY A KIT WITH DEFECTIVE TOP GASKETS!
This is the exact kit used in the new November Hot VW's Magazine article on rebuilding IDF carburetors .
The original RADKE SERVICES 703 kit, Not a cheap knock off.
Hot VW's exact quote "Luckily, most carburetors are easy to rebuild, as long as you have a good kit. for this rebuild we are using a Weber IDF rebuild kit
#703 from Radke Services
that fits 40,44 and 48 Weber carbs as well as the similar empi hpmx models.
The nice thing about this kit is that is includes a new float, needle/seat with Viton tip, early and late accelerator pump diaphragms and spring, idle richment screws, all gaskets, O'rings, seals and even 2 fuel filters
.
About the only other things you'll need for the rebuild besides a few hand tools, is a gallon of carburetor and parts cleaner"
THIS IS A BRAND NEW COMPLETE REBUILD / OVERHAUL KIT FOR WEBER 40-44-48 IDF CARBURETORS ALSO EMPI HPMX'S.
THIS WILL SERVICE ONE CARBURETOR, NOT A PAIR.
Now over 6,500 sold
BUT be sure to check our
Ebay store for a Pair Dis
count 2@ .95
THIS KIT INCLUDES EVERYTHING YOU NEED TO COMPLETELY SERVICE YOUR CARBURETOR, INCLUDING NEW FLOAT AND AIR - FUEL SCREWS & SPRINGS.
THE TOP GASKETS ARE FROM O.E. MATERIAL. TO SPEC.
THE BASE GASKETS AND TOP AIR FILTER GASKET AS WELL AS THE CHOKE BLOCK PLATE GASKETS ARE CUT FROM U.S.A SURE SEAL MATERIAL. THESE ARE THE GASKETS YOU BUY AFTER YOU THROW AWAY THE ORIGINAL WEBER GASKETS THAT ARE TOO THICK AND STIFF AS CARDBOARD.
ALSO OUR KIT STILL INCLUDES THE EARLY ACCELERATOR PUMP DIAPHRAGM, NOW GONE FROM THE OTHER BRAND KITS.
YOU RECEIVE:
3 - TOP GASKETS 40-44-48
1 -  AIR FILTER BASE
1- EARLY ACCELERATOR PUMP DIAPHRAGM
Efuel Safe / Alcohol Resistant
1- LATE ACCELERATOR PUMP DIAPHRAGM - EXTENDED LIFE
Efuel Safe / Alcohol
Resistant
1 - ACCELERATOR PUMP DIAPHRAGM SPRING
1- FLOAT
1- NEEDLE/SEAT WITH VITON TIP
2 - 40MM BASE GASKETS
2 - 44MM BASE GASKETS
1 - CHOKE BLOCK PLATE GASKET
2 - AIR FUEL VOLUME MIXTURE SCREWS,  SPRINGS, CUPS & O'RINGS
1 - INTERNAL FILTER SCREEN
1 - FLOAT BOWL VENT SCREEN (OPTIONAL)  -  (YOU MAY NEED TO OPEN YOUR VENT SLOT TO USE THIS, DEPENDING ON YOUR CARB TOP.)
ALL NECESSARY  IDLE JET O' RINGS AND INLET, PUMP JET AND SCREEN  SEALS TO OVERHAUL YOUR UNIT.
PRINTED DIAGRAM SHEET.
ALSO UNIVERSAL FUEL FILTER THAT CAN BE USED FOR 1/4" FUEL LINE OR CUT TO 5/16"
THIS IS A WELL THOUGHT OUT QUALITY 39 PIECE KIT.
WE ARE THE MANUFACTURER OF THIS PRODUCT AND  HAVE SOLD OVER 2,000 THESE KITS TO WAREHOUSE DEALERS AND SHOPS.
SHIPPING WITHIN 50 U.S. STATES.
THANKS FOR LOOKING